Robustel M1000 UP User Guide - Manual (Page 25)

Robustel GoRugged M1000 UP User Guide
RT_UG_M1000 UP_v.1.0.0
17.10.2013 24 / 39
Note: AT+CMGF=1 sets the SMS to Text mode.
3.3.2 Reading a Short Message
1. Type AT+CMGF=1 and then press Enter.
2. Type AT+CNMI=2,1 and then press Enter.
3. When a short message is received, the modem will show the storage number of the message after “+CMIT: “SM”,
x” (where the x is the storage number).
4. Type AT+CMGR=x to read the message.
5. In the example shown below, the x=5 means that the message is stored in the 5th storage location.