Robustel M1000 UP User Guide - Manual (Page 14)

Robustel GoRugged M1000 UP User Guide
RT_UG_M1000 UP_v.1.0.0
17.10.2013 13 / 39
2.5 Connect the External Antenna (SMA Type)
Connect this to an external antenna with SMA male connector. Make sure the antenna is for the correct frequency as
your GSM/GPRS/UMTS/HSPA
operator with impedance of 50ohm, and also connector is screwed tightly.
2.6 Connect the Modem to External Device
User can use the USB cable to connect the modem’s Mini USB Connector to external slave devices / controller /
computer.
Note: User needs to install relevant USB driver to PC, which you can find out in the CD.
2.7 Mount the Modem
Use 2 pcs of M3 screw to mount the modem on the wall.
Screw tightly
Wall Mounting Screw Hold