Black & Decker BL10451GNEWUC - Manual (Page 2)

Size: 19.685" x 17.5"
POLARIZEd PLUG
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. To reduce the risk of fire or electric
shock, do not attempt to remove the outer cover. There are no user-
serviceable parts inside. Repair should be done only by authorized
service personnel.
ELECTRICAL CORd
a) A short power-supply cord (or detachable power-supply cord) is to be
provided to reduce the risk resulting from becoming entangled in or
tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are
available and may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord
or extension cord should be at least as great as the electrical
rating of the appliance,
2) If the appliance is of the grounded type, the extension cord should
be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over
the countertop or tabletop where it can be pulled on by children
or tripped over.
Note: If the power supply cord is damaged, it should be replaced by
qualified personnel or in Latin America by an authorized service center.
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARdS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
❍
Read all instructions.
❍ To protect against risk of electrical shock do not immerse cord,
plugs or appliance in water or other liquid.
❍ Close supervision is necessary when any appliance is used by or
near children.
❍ Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
❍ Avoid contacting moving parts.
❍ Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in any
manner. Return appliance to the nearest authorized service facility
or call the appropriate toll-free number on the front of this manual
for examination, repair or electrical or mechanical adjustment. Or,
call the appropriate toll-free number on the cover of this manual.
❍ The use of attachments, including canning jars, not recommended
by the manufacturer may cause fire, electric shock or injury.
❍ Do not use outdoors.
❍ Do not let cord hang over edge of table or counter.
❍ Keep hands and utensils out of container while blending to reduce
the risk of severe injury to persons or damage to the blender. A
scraper may be used, but must be used only when the blender is
not running.
❍ Blades are sharp. Handle carefully.
❍ To reduce the risk of injury, never place cutter-assembly blades on
base without jar properly attached.
❍ Always operate blender with cover in place.
❍ When blending hot liquids, remove center piece of two-piece cover.
SAVE THESE INSTRUCTIONS.
This product is for household use only.









How to Use
This product is for household use only.
The unit has a motor overheating protection system that automatically shuts
off the motor to protect it from overheating. Wait 5 minutes for unit to cool
down. Unplug the unit then plug again to resume operation.
BLENdER JAR ASSEMBLY
1. Before first use, wash all parts except the unit base. Put-the gasket on
top of the blade assembly.
2. Place the blade assembly into the jar base and turn
the jar base clockwise until tight (A).
3. Interlock System: Place the assembled jar onto the
unit base and turn toward lock ( ) until secured in
place. You’ve engaged the interlock system if you lift
the jar handle and the entire blender lifts together as
one unit.
For 220V units only: If the jar is not installed properly, the unit will not
function.
USING YOUR BLENdER
1. Be sure the unit is “OFF” and plug the cord into a standard electrical
outlet.
2. Place the food to be blended into the jar and the lid on the jar before
blending.
3. Be sure that the lid cap is in place. When crushing ice or hard foods,
keep one hand on the lid.
4. Choose the speed that best suits
your task for food or beverage
blending (B). Press the LOW/HI
button in combination with the task
button when choosing or switching
speeds.
5. Use the Pulse (P) button for a few
seconds, then release for quick or
delicate blending tasks. Releasing
the pulse automatically turns the
blender off.
6. If you want to add ingredients while the blender is on, remove the lid
cap and drop ingredients through the lid opening.
7. When finished blending, push the Off/Pulse (O/P) button.
8. To remove the jar, grasp the handle, twist toward the unlock (
) and
lift it from the unit base. Remove the lid before pouring.
BLENdING TIPS ANd TECHNIQUES
• Cut food into small pieces about ¾” (2 cm) before adding to the blender.
• When ingredients stick or spatter along the sides of the jar, stop the
blending action and remove the lid. Use a rubber spatula to push food
toward the blades. Replace the lid, then continue blending.
• Some of the tasks that cannot be performed efficiently with a blender
are: beating egg whites, whipping cream, mashing potatoes, grinding
meats, mixing dough, and extracting juices from fruits and vegetables.
• The following items should never be placed in the unit as they may
cause damage: dried spices and herbs (ground alone), bones, large
pieces of solidly frozen foods, tough foods such as turnips.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified
service personnel.
TO MAINTAIN PERFORMANCE, dRY BLAdES AFTER CLEANING.
FAST CLEAN
1. The "Fast Clean" feature helps make it easier to clean the blender jar
by loosening food particles. You may use the "Fast Clean" feature by
filling the jar half full with lukewarm water. Add a little dish detergent
for tough cleaning jobs (such as after making salsa, shakes, or salad
dressing). Hold the lid and press any button. Let the unit run for about
5 seconds, then press Off.
2. Unplug the unit, twist to unlock ( ), lift the jar off the unit base,
and rinse.
3. Parts may be hand-washed. Follow the cleaning instructions below.
For hand washing parts:
1. Before cleaning, turn off and unplug the blender.
2. Rinse parts immediately after blending for easier cleanup.
3. Wipe the unit base with a damp cloth and dry thoroughly. Remove
stubborn spots by rubbing with a damp cloth and non-abrasive cleaner.
Important: do not immerse the base in liquid.
4. Removable parts can be washed by hand or in a dishwasher. Do not
place jars or parts in boiling liquids.
5. If liquids spill into the base, wipe with a damp cloth and dry thoroughly.
Do not use rough scouring pads or cleansers on parts
or finish.
A
is a registered trademark of The Black & Decker Corporation,
Towson, Maryland, USA
NEEd HELP?
For service, repair or any questions regarding your appliance, call the
appropriate 800 number on cover of this book. Please dO NOT return the
product to the place of purchase. Also, please dO NOT mail product back to
manufacturer, nor bring it to a service center. You may also want to consult
the website listed on the cover of this manual.
Two-Year Limited Warranty
(Applies only in the United States and Canada)
What does it cover?
• Any defect in material or workmanship provided; however, Applica’s
liability will not exceed the purchase price of product.
For how long?
• Two year(s) from the date of original purchase with proof of such
purchase.
What will we do to help you?
• Provide you with a reasonably similar replacement product that is either
new or factory refurbished.
How do you get service?
• Save your receipt as proof of date of sale.
• Visit the online service website at www.prodprotect.com/applica, or call
toll-free
1-800-231-9786, for general warranty service.
• If you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some
states do not allow the exclusion or limitation of consequential or
incidental damages, so this limitation may not apply to you.)
How does state law relate to this warranty?
• This warranty gives you specific legal rights. You may also have other
rights that vary from state to state or province to province.
Póliza de Garantía
(Válida sólo para México)
duración
Applica Manufacturing, S. de R. L. de C.V. garantiza este producto
por 2 años a partir de la fecha original de compra.
¿Qué cubre esta garantía?
Esta Garantía cubre cualquier defecto que presenten las piezas,
componentes y la mano de obra contenidas en este producto.
Requisitos para hacer válida la garantía
Para reclamar su Garantía deberá presentar al Centro de Servicio
Autorizado la póliza sellada por el establecimiento en donde adquirió
el producto. Si no la tiene, podrá presentar el comprobante de compra
original.
¿donde hago válida la garantía?
Llame sin costo al teléfono 01 800 714 2503, para ubicar el Centro de
Servicio Autorizado más cercano a su domicilio en donde usted podrá
encontrar partes, componentes, consumibles y accesorios.
Procedimiento para hacer válida la garantía
Acuda al Centro de Servicio Autorizado con el producto con la póliza de
Garantía sellada o el comprobante de compra original, ahí se reemplazará
cualquier pieza o componente defectuoso sin cargo alguno para el usuario
final. Esta Garantía incluye los gastos de transportación que se deriven de
su cumplimiento.
Excepciones
Esta Garantía no será válida cuando el producto:
A) Se hubiese utilizado en condiciones distintas a las normales.
B) No hubiese sido operado de acuerdo con el instructivo de uso que le
acompaña.
C) Cuando el producto hubiese sido alterado o reparado por personas no
autorizadas por Applica Manufacturing, S. de R. L. de C.V.
Nota: Usted podra encontrar partes, componentes, consumibles y
accesorios en los centros de servicios autorizados. Esta garantía incluyen
los gastos de transportación que se deriven de sus cumplimiento dentro
de sus red de servicio.
Argentina
SERVICIO TECNICO CENTRAL
ATTENDANCE
Avda. Monroe N° 3351
Buenos Aires – Argentina
Fonos: 0810 – 999 - 8999
011 - 4545 - 4700
011 – 4545 – 5574
[email protected]
Chile
MASTER SERVICE SERVICENTER
Nueva Los Leones N° 0252
Providencia
Santiago – Chile
Fono Servicio: (562) – 232 77 22
[email protected]
Colombia
PLINARES
Avenida Quito # 88A-09
Bogotá, Colombia
Tel. sin costo 01 800
7001870
Costa Rica
Aplicaciones Electromecanicas, S.A.
Calle 26 Bis y Ave. 3
San Jose, Costa Rica
Tel.: (506) 257-5716 / 223-0136
Ecuador
Servicio Master de Ecuador
Av. 6 de Diciembre 9276 y los Alamos
Tel. (593) 2281-3882
El Salvador
Calle San Antonio Abad 2936
San Salvador, El Salvador
Tel. (503) 2284-8374
Guatemala
MacPartes SA
3ª Calle 414 Zona 9
Frente a Tecun
Tel. (502) 2331-5020 / 2332-2101
Honduras
ServiTotal
Contigua a Telecentro
Tegucigalpa, Honduras,
Tel. (504) 235-6271
México
Articulo 123 # 95 Local 109 y 112
Col. Centro, Cuauhtemoc,
México, D.F.
Tel. 01 800 714 2503
Nicaragua
ServiTotal
De semáforo de portezuelo
500 metros al sur.
Managua, Nicaragua,
Tel. (505) 248-7001
Panamá
Servicios Técnicos CAPRI
Tumbamuerto Boulevard
El Dorado Panamá
500 metros al sur.
Tel. 3020-480-800 sin costo
(507) 2360-236 / 159
Perú
Servicio Central Fast Service
Av. Angamos Este 2431
San Borja, Lima Perú
Tel. (511) 2251 388
Puerto Rico
Buckeye Service
Jesús P. Piñero #1013
Puerto Nuevo, SJ PR 00920
Tel.: (787) 782-6175
Republica dominicana
Plaza Lama, S.A.
Av, Duarte #94
Santo Domingo,
República Dominicana
Tel.: (809) 687-9171
Venezuela
Inversiones BDR CA
Av. Casanova C.C.
City Market Nivel Plaza Local 153
Diagonal Hotel Melia,
Caracas.
Tel. (582) 324-0969
www.applicaservice.com
[email protected]
Por favor llame al número correspondiente que aparece en la lista a continuación
para solicitar que se haga efectiva la garantía y donde Ud. puede solicitar
servicio, reparaciones o partes en el país donde el producto fué comprado.
También puede consultarnos en el e-mail servicio@applicamail com.mx
es una marca registrada de The Black & Decker Corporation,
Towson, Maryland, E.U.
Product may vary slightly from what is illustrated.
Made in People’s Republic of China
Printed in People’s Republic of China
1. Lid cap
2. Lid
3. Jar
4. Handle
5. Gasket
6. Blade assembly
7. Jar base
8. Unit base
9. Controls (see B)
B
Models:
BL10451G-AR-CL
BL10451P-ARCL
Models:
BL10451HG-AR-CL
BL10451HP-CL