Retsch BB 300 - Manual (Page 11)

07/02/2012 Retsch GmbH 11
Electrical Connection
The electrical connection must be established by a specialist
electrician.
Consult the type plate for the voltage and frequency of the BB
300.
Ensure that the values are in agreement with the mains power
supply.
Connect the BB 300 to the mains using the cable supplied.
Ensure that there is an external fuse in accordance with the local
regulations when connecting the unit to the mains supply.
Failure to observe the values on the type plate can result in damage
to electronic or mechanical components.
Prior to initial start-up, check the direction of rotation. See the
direction arrow on the motor.
If the direction of rotation is incorrect, crushing performance is
inadequate and mechanical components can be damaged.