Retsch BB 200 - Manual (Page 8)

04/05/2012 Retsch GmbH
8
Shipping and installation
Packing
The type of packaging used has been selected in accordance with
the shipping mode. It complies with generally accepted
packaging guidelines.
Please retain the packaging for the duration of the
guarantee since, in case of a claim, returning in unsuitable
packaging can jeopardize your guarantee entitlements.
Shipping
The BB 200 shall not be subjected to impact or vibration
during transportation; it shall not be thrown. The
electronic and mechanical components could otherwise be
damaged.
Abb.1
In order to be able to transport the BB 200 with a crane
(capable of lifting at least 500 kg), it should be fixed with
ties as in figure 1.
Intermediate storage
Please pay attention to the fact that the BB 200 must also
be kept dry when in intermediate storage.
Temperature fluctuations
In case of wide temperature fluctuations (during shipment
by air, for instance) the BB 200 will have to be protected
against condensation; the electronic components could
otherwise be damaged.
Intermediate storage
Also ensure that the BB 200 is stored in a dry place.
Requirements for the installation site
Ambient temperature:
5°C to 40°C
When the ambient temperature exceeds or falls below that
specified, the electronic and mechanical components may be
damaged, and performance data changed to an unknown
extent.
Humidity:
Maximum relative humidity 80% at temperatures up to 31°C;
linear decline down to 50% relative humidity at 40°C.
At higher humidity, the electronic and mechanical
components may be damaged, and performance data
changed to an unknown extent.
Installation site – altitude
max. 2000 m above mean sea level