Retsch BB 200 - Manual (Page 17)

04/05/2012 Retsch GmbH
17
Maintenance
CE
Fig. 8
The BB 200 is to be lubricated from time to time. Fig. 8
Kindly refer to the table below for the quantities of grease and
the lubrication intervals.
The lubrication points are marked with red dots on the unit.
No.
Quan. in kg Interval, hours of operation
1 0.008 50
2 0.008 50
The points not shown in Fig. 8 but indicated with arrows are
permanently lubricated.
Use the grease gun supplied with the BB 200 for lubrication
purposes.
Ordinary multi-purpose graese can be used as lubricant, e.g. EP
4685 by ESSO / SHELL or BP.
Functional inspections
The limit switch at the fill hopper is to be checked semiannually
for proper functioning. Fig. 9
*
Open the toggle clamp F on the filling hopper B.
* Pull back the filling hopper.
* The BB 200 stops completely.
* Pull down and close the filling hopper B.
The BB 200 must not start up again.
*
Close the toggle clamp F on the filling hopper B.
* Start the BB 200.
Fig. 9
B
F