Mixer page – Precisionsound Jetstream 2 User Manual
Page 6
6
© Copyright Precisionsound 2014
Mixer Page
Assign
The four assign menus set the loops that are triggered when you next play a note.
We distinguish between sounds and loops. A sound is a channel containing a loop,
mixer strip, filters, and modulations. Four sounds are available, and are colour
coded on the interface (sound 1 = green, 2 = blue, 3 = turquoise, 4 = coral). A loop
is an audio file that can be used as the source for one or more sounds.
So for example, you could assign the same loop to all four sounds, each with unique mixer and filter
settings. Or, you could assign different loops to each sound.
Setting an assign menu to ‘None’ makes it inactive on the next played note. To turn sounds on or off
while holding notes, use the buttons in the mixer strips, described below.
Mixer strips
Each sound has a dedicated mixer strip.
Sound button: enables or disables the sound.
Vol: sets the volume of the sound.
Pan: sets the position of the sound in the stereo field.
Width: sets the stereo width of the sound, from mono to natural stereo.
Pitch: sets the pitch of the sound.
Start: sets the start point of the sound, up to 10 seconds from the beginning of the loop.
All numerical controls in Jetstream 2 have a simplified value range of 0 to 100, or -100 to +100.