Precision Turbo and Engine Precision Turbo & Engine PW39 Wastegate User Manual
Page 9
PART NUMBER:
PBO085-1000
NAME: PW39
DESCRIPTION:
39MM EXTERNAL WASTEGATE
Warranty
Each Precision Turbo PW39 wastegate is warranted to be free from manufacturer’s defect for a period of
12 months or 12,000 miles, whichever occurs first from the date of the original invoice. Manufacturer’s
warranty otherwise applies. Seller expressly disclaims all implied warranties of merchantability and or
fitness for a particular purpose.
Precision Turbo will repair or replace, at its discretion, any Precision Turbo branded product that proves
defective in material or workmanship under normal installation, use and service. In the case of any
warranty claim with regards to defects in material or workmanship, the product in question should be
returned, freight prepaid to the address shown below.
This warranty does not cover damage or failure of components due to normal wear and tear. There is no
warranty on any parts used in race applications, or on products that have been physically altered,
improperly installed or not maintained. Seller’s warranty is in lieu of all other warranties, expressed or
implied.
RETURNS
Returns for credit or exchange are allowable only with a Returned Goods Authorization (RGA) number
for 30 days from date of shipment. Restocking fees may apply. Product must be new or in resalable
condition and returned at the customers expense freight prepaid. All claims for shipping damage must be
addressed with the carrier by the customer.
DISCLAIMER
Precision Turbo does not warrant the accuracy or completeness of the information contained in the
manual. Any information and specifics contained in the manual are provided “as is” without any
representation or warranty, expressed or implied, of any kind, including, but not limited to, warranties of
merchantability, non-infringement, or fitness for any particular purpose. Some jurisdictions do not allow
for the exclusion of implied warranties, so the above exclusions may not apply to you.
Federal, State or provincial laws, rules and regulations in the US, Canada or elsewhere may prohibit the
removal or modification of components that were installed on motor vehicles or engines by the original
equipment manufacturer, in order to meet emissions requirements or to comply with safety regulations
applicable to engines or vehicles manufactured for use on public roads or highways. Removal of such
components and installation of Precision Turbo products may be illegal and considered to be emissions-
related tampering under applicable laws, rules and regulations. Motor vehicles or engines equipped with
Precision Turbo products may not be used on public roads or highways, as installation of such products
could cause the vehicles engine to be non-compliant with applicable emissions and or safety standards.
Installation of Precision Turbo products (or similar products from other manufacturers) on a motor
vehicle or engine, may void, reduce or otherwise adversely affect any warranties given by the
manufacturer or seller of the vehicle, engine or other component parts.
Precision Turbo & Engine 616A South Main Street P.O. Box 425 46341-0425
Phone (219) 996-7832 Fax (219) 996-7749 Rev: 020510 PLR
Page - 9