Precision Turbo and Engine Precision Turbo & Engine PW39 Wastegate - Manual (Page 5)

PART NUMBER: PBO085-1000
NAME: PW39
DESCRIPTION: 39MM EXTERNAL WASTEGATE
Wastegate spring removal and installation
1. Remove the PW39 WASTEGATE from the inlet pipe or manifold.
USE CAUTION AS THE WASTEGATE MAY STILL BE VERY HOT!
2. WARNING! THE WASTEGATE CAN TOP IS UNDER HIGH SPRING TENSION. USE
SAFETY GOGGLES AND REMOVE WITH CARE. Using a 4mm hex key, remove the six hex
keyed cap screws that secure the billet aluminum top to the wastegate. The use of a press or vise may be
used to hold down the wastegate can top while loosening the bolts. If using a press or vise for
disassembly, use a cloth or micro fiber rag to protect the surface finish from scratches.
Remove the cap slowly, using care to secure the spring/springs upon removal.
Page – 5