Other products available, Model 525 operating instructions, Warranty – Practical Instrument Electronics 525 Rev F User Manual
Page 8

Model 525 Operating Instructions
841 Holt Road #1 • Webster, NY 14580
Tel: 585-872-9350 • Fax: 585-872-2638
[email protected] • http://www.piecal.com/
Practical Instrument Electronics, Inc. Copyright © 2004. All rights reserved.
525-9002 5/26/05
8-8
Other Products Available:
RTD Source (Single Type/1° resolution)
Model 510
RTD Source (7 Types, Ω/0.1° resolution)
Pt100: α=1.3850, 1.3902, 1.3916, 1.3926, Cu10: α=1.427
Ni110: α=1.530, Ni120: α=1.672
Model 511
RTD Calibrator (Source/Read 7 Types, Ω /0.1° resolution)
Model 512
RTD Calibrator (Source, Read & Auto Stepping 8 Types, Ω /0.1°
resolution)
Model 512S
T/C Source (Single Type/1° resolution)
Model 520
T/C Source (8 Types, mV/0.1° resolution)
B, E, J, K, N, R, S, T, mV
Model 521
T/C Calibrator (Source/Read 8 Types, mV /0.1° resolution)
B, E, J, K, N, R, S, T, mV
Model 522
4-20 Milliamp Loop Calibrator
Model 530
Pocket-Mate Milliamp Calibrator
Model 531
4-20 Milliamp Loop Calibrator with Diagnostic
Model 532
4-20/10-50 Dual Range Loop Calibrator
Model 535
Frequency Read & Source with Totalizer
Model 541
Warranty
Our equipment is guaranteed against defective material and workmanship (excluding batteries) for a period of three years from the
date of shipment. Claims under guarantee can be made by returning the equipment prepaid to our factory. The equipment will be
repaired, replaced or adjusted at our option. The liability of Practical Instrument Electronics (PIE) is restricted to that given under our
guarantee. No responsibility is accepted for damage, loss or other expense incurred through sale or use of our equipment. Under no
condition shall Practical Instrument Electronics, Inc. be liable for any special, incidental or consequential damage.