Penpower WorldocScan 400 (Win) - Manual (Page 12)

2-4
Scan2PDF
2.3 Calibration
Calibration is necessary to ensure that your computer monitor matches the image
quality of Scan2PDF. When Scan2PDF runs for the first time, the calibration wizard will
appear to guide you through the process.
Note: If you use the scanner on another computer, you need to calibrate the scanner
again.
1. Run the Scan2PDF.
2. Place the blank side of the calibration card with face-dwon in the scanner and then
click the [Calibrate scanner] button on the toolbar.
Tip: The calibration card is included in the box. If you lose it, you can use a same
size of blank paper instead.
3. In the [Calibrate scanner] dialog box, click on the [Calibration] button and
scanner calibration will begin.
4. Click the [OK] button when the calibration process is finished.
Tip: If there is any color indifference after scanning, you can calibrate the scanner
by clicking [Calibrate scanner] button on the toolbar.