Oxygenics Easy Slide Bar with Combo - Manual

STOP!
Need HelP?
PleaSe dO NOT reTurN THiS
PrOducT TO THe STOre.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or
1.775.420.5600
Support is also available via email at
[email protected]
Be sure to visit our website at
www.oxygenics.com
Business Hours: Monday-Friday
7:00 am to 4:30pm PST
eaSY TWiST SPraY
SelecTiON
Enjoying multiple spray
patterns during your
shower has never been
easier. With the Force’s
easy twist design,
simply rotate the easy
spray selector for a quick
spray change.
uSiNG THe diVerTer
To change the shower spray: Place your
index finger on one lever and your thumb on
the other lever and rotate either clockwise
or counter
clockwise
(depending
on the current
position) until
you feel it click
into place.
aTTeNTiON:
SmOOTH eNd Of HOSe aTTacHeS TO SHOWer Head
eaSY iNSTallaTiON
iNSTrucTiONS
STeP 1
To remove your existing
shower head turn the
existing shower head in a
counterclockwise direction.
STeP 4
Carefully remove covering
from adhesive strips. Use
caution as adhesive is
extremely powerful.
STeP 7
In a clockwise direction,
screw fixed unit onto
the taped portion of the
diverter and hand tighten.
STeP 2
Remove any remnants of
old plumber’s tape and flush
out shower pipe for 5 to 10
seconds. Wrap plumber’s tape
clockwise 3 or 4 turns around
threaded end of shower arm.
STeP 5
Place Easy Slide Bar in
desired location within
shower. Press and hold
firmly in place for 30
seconds.
STeP 8
Attach grooved end of
hose to diverter and hand
tighten. Attach smooth
end of hose to base of
handheld shower and
hand tighten.
STeP 3
Thoroughly clean area
where Easy Slide Bar will
be applied.
STeP 6
Screw the diverter
clockwise onto the taped
portion of the shower arm.
Wrap plumber’s tape 3
turns around threaded ends
of the diverter.
STeP 9
Insert your new handheld
shower into holder. Press
and hold button on shower
bar carriage and slide
carriage to desired height.
Release button to lock in
position.
E
asy
s
lidE
B
ar
with
F
orcE
c
omBo