Oxygenics BodySpa RV - Manual

STOP!
Need HelP?
PleaSe dO NOT reTurN THiS
PrOducT TO THe STOre.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or
1.775.420.5600
Support is also available via email at
[email protected]
Be sure to visit our website at
www.oxygenics.com
Business Hours: Monday-Friday
7:00 am to 4:30pm PST
B
ody
S
pa
RV
eaSy iNSTallaTiON
iNSTrucTiONS
aTTeNTiON:
SmOOTH eNd Of HOSe aTTacHeS
TO SHOwer Head
STeP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STeP 4
In a clockwise
direction, screw
grooved end of
hose to the taped
portion of the
shower arm. Hand
tighten only.
STeP 2
Remove any
remnants of old
plumber’s tape and
flush out shower
pipe for 5 to 10
seconds.
STeP 5
Attach wide end of
the SmartPause ™
valve to base of the
handheld shower
and hand tighten.
Attach smooth
end of the hose to
opposite end of the
SmartPause ™ valve.
STeP 3
Wrap plumber’s
tape clockwise 3
or 4 turns around
threaded end of
shower arm.
STeP 6
Attach double
stick tape provided
to back of holder
and press firmly to
clean, dry shower
wall. Place your new
handheld shower
head into holder.
uSiNG THe
SmarTPauSe ValVe
Located at the base of the BodySpa® wand, the
SmartPause™ valve allows you to pause your shower
while you lather up.
To pause the shower spray: Gently push the button
on the SmartPause™ valve from left to right to
pause the shower’s flow. To resume flow, simply
push button back to the left.