Oxygenics BodySpa with comfort control - Manual

STOP!
Need HelP?
PleaSe dO NOT reTurN THiS
PrOducT TO THe STOre.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or
1.775.420.5600
Support is also available via email at
[email protected]
Be sure to visit our website at
www.oxygenics.com
Business Hours: Monday-Friday
7:00 am to 4:30pm PST
eaSy iNSTallaTiON
iNSTrucTiONS
aTTeNTiON:
SmOOTH eNd Of HOSe aTTacHeS
TO SHOwer Head
STeP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STeP 4
In a clockwise
direction, screw
handheld holder
onto the taped
portion of shower
arm. Hand tighten
only.
STeP 2
Remove any
remnants of old
plumber’s tape
and flush out
shower pipe for
5 to 10 seconds.
STeP 5
Attach wide end
of the Comfort
Control Valve to
base of handheld
shower and turn
counterclockwise.
Hand tighten only.
STeP 3
Wrap plumber’s
tape clockwise 3
or 4 turns around
threaded end of
shower arm.
STeP 6
Attach grooved end of
hose to holder, turning
counterclockwise.
Attach smooth end
of hose to Comfort
Control Valve, turning
counterclockwise.
Hand tighten only.
uSiNG THe cOmfOrT cONTrOl
To change the shower spray, rotate (left or right) the
ribbed portion of the comfort control regulator to the
desired flow. Be careful not to unscrew the regulator from
handheld shower.
Note: The comfort control regulator is not a shut off valve.
When turned to the lowest position, the shower head
continues to flow. This is a normal safety feature.
B
ody
S
pa
with comfort control