NTi Audio TalkBox User Manual

Page 19

nector of the Battery pack. The connectors are compatible. The red charge LED will
light up during the charge process. Once the battery is full the red LED will go off
and the rightmost green (Full) LED will go on. The DC output of the battery pack is
disabled during the charge process and thus not usable.

Use of the battery

Connect the DC output of the battery pack with the
DC input of the TalkBox using the provided connection
cable and the G/G4 adaptor. As soon as the
connection is established, the NTi Audio TalkBox starts
running. For storage or when not used for a longer
period of time, please disconnect the battery cable
preventing the complete discharging of the battery.

To check the charge indication, press the black
charge test button and the three green LED will
indicate the charge level.

Technical data

Battery type:

Li-Ion Battery

Input voltage:

12V - 24V DC, 1A max.

Output voltage:

9V, 2A max.

Capacity:

39 Watt hours nominal

Dimensions:

153 mm x 93 mm x 23mm (6” x 3.72” x 0.9”)

Weight:

400g (0.8lbs)

Running time with battery pack (typical)

Idle mode:

Standby, Electrical output:

15 hours

STIPA:

Output on (60dB

SPL

)

12 hours

STIPA Lombard:

Output on (70dB

SPL

)

7 hours