Black & Decker BDWS100 - Manual (Page 6)

6
OPERATION
7. Attaching Platform Supports
Locate the two platform supports on the main support rails as
shown in Fig 7A. NOTE! The solid hook locator is placed under
the front support rail. Rotate the platform back and down until
the spring loaded latch snaps in place as shown in the underside
view in the inset of Fig. 7B.
CAUTION: Make sure the supports are securely fastened to
the stand before each use of your miter saw with this stand.
MODEL FS105WS - MITER SAW STAND MODEL FS105WS - MITER SAW STAND
7B
8
7A