New Era NE-300 Just Infusion Syringe - Manual (Page 5)

New Era Pump Systems Inc.
www.SyringePump.com
Model NE-300 Syringe Pump
Copyright: New Era Pump Systems Inc. 2 08/27/14
Warranty
New Era Pump Systems Inc. warranties this product and accessories for a period of two year, parts and labor, from the date
of purchase. The repaired unit will be covered for the period of the remainder of the original warranty or 90 days,
whichever is greater.
A return authorization number must be obtained from New Era Pump Systems Inc. before returning a unit for repair.
Warranty covered repairs will not be performed without a return authorization number. At the option of New Era Pump
Systems Inc., a defective unit will be either repaired or replaced.
This warranty does not cover damage by any cause including, but not limited to, any malfunction, defect or failure caused
by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished instructions,
shipping or transit accidents, modifications or repair by the user, harsh environments, misuse, neglect, abuse, accident,
incorrect line voltage, fire, flood, other natural disasters, or normal wear and tear. Changes or modifications not approved
by New Era Pump Systems Inc. could void the warranty. Wearable parts, such as drive nuts, are not covered by the
warranty.
The foregoing is in lieu of all other expressed warranties and New Era Pump Systems Inc. does not assume or authorize
any party to assume for it any other obligation or liability.
2. Overview
The NE-300 is a general purpose single syringe pump capable of infusing at digitally set pumping rates. It is
controlled from a microcontroller based system which drives a step motor, allowing a wide range of pumping
rates configured to the inside diameter of the loaded syringe. The syringe is driven from a drive-screw and
drive-nut mechanism.
Features:
♦ Infusion pumping of syringes up to 140 mL.
♦ Pumping rates from 0.73 µL/hr with a 1 mL to
1500 mL/hr with a 60 mL.
♦ Display of infused volume.
♦ Non-volatile memory of all operating parameters.
♦ Power Failure Mode: Re-starts pumping after a
power interruption.
2.1 Glossary of Terminology and Concepts
When a device has as many features as the NE-1000 series, understanding its operation could be a daunting
task at first. By understanding the key concepts and terminology used in this manual, the operation of the
NE-300 will become quite intuitive. Every effort has been made to design the NE-300 with a consistent and
intuitive user interface.
1
2
3 4 5
6
7
8
9
10