beautypg.com

Inspection/setup, Heat source fuel expands when heated – Multiquip SG1400C3-55748 User Manual

Page 31

background image

Sg1400C3 STudio generaTor • operaTion and parTS manual — rev. #1 (02/15/12) — page 31

inSPECtiOn/SEtuP

1. Place the generator level with the ground. Failure to do

so will cause fuel to spill from the tank before reaching

full capacity (Figure 12).

Figure 12. Only Fill on Level Ground

2. Remove fuel cap and fill tank (Figure 13).

Figure 13. Fueling the Generator

3. Monitor the fuel gauge while filling fuel tank. Stop filling

when the fuel gauge indicates full (Figure 14).

do noT

wait for fuel to rise in filler neck.

Level Ground

Unlevel Ground

=

Level Ground

Unlevel Ground

DO NOT fill on

unlevel ground

!

!

70

NOTICE

onlY use #2 diesel fuel when refueling.

DIESEL

FUEL

Figure 14. Full Fuel Tank

Figure 15. Fuel Expansion

1/2

E

F

CauTion

do noT overFill fuel system. Leave room for fuel

expansion. Fuel expands when heated (Figure 15).

1/2

E

F

!

!

Heat Source

Fuel

EXPANDS

when heated