beautypg.com

Shs62a cut-off saw — maintenance – Multiquip SHS62A User Manual

Page 24

background image

PAGE 24 — SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06)

Reverse the

cutting arm

180 degrees as shown in the Figure

23, and re-tension the V-belt by turning the

belt tensioning

cam

O

. The V-belt should remain in tension.

Fully tighten the three nuts

N

that lock the V-belt into the proper

tensioning position.

Figure 23. Reversing the Cutting Arm

Figure 24. Re-attaching Cover Guard

Re-attach the

cover guard

K

with the 2 cap screws

J

,

and reconnect the

guard adjustment knob

I

.

SHS62A CUT-OFF SAW — MAINTENANCE

Reversing the Cutting Arm Procedure (continued)

See also other documents in the category Multiquip Equipment: