Multiquip BS46HLE - Manual (Page 26)

page 26 — BS46H SeRIeS WaLK-BeHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #2 (10/15/13)
Stopping The Engine
1. Move the throttle lever to the (Figure 32) " idLE"
position and run the engine for three minutes at low
speed.
Figure 32. Throttle Lever (Idle)
2. After the engine cools, turn the engine start/stop switch
to the “ Off” position (Figure 33).
Figure 33. Engine ON/OFF Switch
(OFF Position)
3. Place the safety stop switch (Figure 34) in the " Off"
position.
Figure 34. Safety Stop Switch (OFF)
THROTTLE
LEVER
IDLE
OFF
operation
4. Close the fuel shut- off valve (Figure 35) by moving the
fuel valve lever to the Off position.
Figure 35. Fuel Valve Lever (OFF)