Multiquip BS46HLE - Manual (Page 22)

page 22 — BS46H SeRIeS WaLK-BeHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #2 (10/15/13)
NeveR lift the trowel to unnecessary heights. dO NOT
stand underneath the trowel while it is being lifted. Serious
damage to the machine or personal injury could be caused
by dropping a trowel.
Starting the Engine
1. Place the engine fuel valve lever (Figure 20) in the
"ON" position.
Figure 20. Engine Fuel Valve Lever (ON)
2. Pull the throttle lever (Figure 21) backwards and place
in the " idle" position.
Figure 21. Throttle (Idle Position)
THROTTLE
LEVER
IDLE
operation
3. Place the centrifugal safety "STOP" switch
(Figure 22) in the " ON" position.
Figure 22. Centrifugal Safety"Stop"
Switch (ON)
4. Place the choke lever (Figure 23) in the "OpEN "
position.
Figure 23. Choke Lever Open
ON
OFF
CENTRIFUGAL
SAFETY “STOP”
SWITCH
CaUTION
NEVER disable or disconnect the centrifugal safety
"STOP" switch. It is provided for the operator's safety
and injury may result if it is disabled, disconnected or
improperly maintained.