Multiquip MVH206GH - Manual (Page 26)

PAGE 26 — MVH-206GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #0 (06/17/08)
MAINTENANCE
BLEEDER
PLUG
HYDRAULIC
CYLINDER
Figure 33. Bleeder Plug
3. Loosen bleeder plug located at top of hydraulic cylinder
on side of vibrator (Figure 33). Air remaining in the
circuit will be forced out of the bleeder plug. Once all
air has been purged from the hydraulic system, tighten
bleeder plug securely
4. Reinsert oil plug into hydraulic oil tank and tighten
securely. Reinstall breather cap.
LONG TERM STORAGE
When storing your compactor for long periods do the
following:
1. Run the engine at idle speed for 3-5 minutes.
2. Stop the engine. Drain the engine crankcase oil while
the engine is still warm. Fill engine crankcase with fresh
oil.
3. Wipe any oil or dirt that may have accumulated on the
compactor.
4. Store compactor in a cool dry place out of reach of
children and unauthorized personnel.