Multiquip MVC88VTHW - Manual (Page 21)

MVC88VTH/VTHW pLaTe COMpaCTOR • OpeRaTiOn and paRTs ManuaL — ReV. #2 (12/09/13) — page 21
OpERATION/MAINTENANCE
MainTenanCe
General maintenance practices are crucial to the
performance and longevity of your compactor. This
equipment requires routine cleaning, inspection and
lubrication. Reference Table 5 and Table 6 for scheduled
engine and compactor maintenance.
The following procedures, devoted to maintenance, can
prevent serious compactor damage or malfunctioning.
NOTICE
Reference HOnda engine manual supplied with your
compactor for more detailed engine maintenance and
troubleshooting.
CauTiOn
aLWays allow the engine to cool before
servicing. neVeR attempt any maintenance
work on a hot engine.
CauTiOn
aLWays disconnect the spark plug wire from the spark
plug and secure away from the engine before performing
maintenance or adjustments on the machine.
WaRning
Some maintenance operations may
require the engine to be run. Ensure
that the maintenance area is well
ventilated. Gasoline engine exhaust
contains poisonous carbon monoxide
gas that can cause unconsciousness
and may result in deaTH
general Cleanliness
Clean the compactor daily. Remove all dust and debris
buildup (mud, clay etc.). If the compactor is steam-cleaned,
ensure that lubrication is accomplished aFTeR steam
cleaning.
NOTICE
Inspection and other services should always be carried
out on hard and level ground with the engine shutdown.
NOTICE
The inspection intervals listed in the maintenance tables
are for operation under normal conditions. Adjust your
inspection intervals based on the number hours plate
compactor is in use, and particular working conditions.