Blaupunkt CALGARY MP36 - Manual (Page 24)

51
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Cancelling REPEAT
To stop the current track or current CD
from being repeated,
➮
briefly press the 4 RPT button ;.
“RPT OFF” appears and RPT disap-
pears from the display.
Random track play (MIX)
To play the tracks on the current CD in
random order,
➮
briefly press the 5 MIX button
;.
“MIX CD” appears briefly in the display
and MIX is displayed.
To play the tracks on all the inserted
CDs in random order,
➮
press and hold down the 5 MIX
button
; for longer than two sec-
onds.
“MIX ALL” appears briefly in the dis-
play and MIX is displayed.
Cancelling MIX
➮
Briefly press the 5 MIX button ;.
“MIX OFF” appears and MIX disap-
pears from the display.
Scanning all the tracks on all
the CDs (SCAN)
To scan (briefly play) all the tracks on
all the inserted CDs in ascending or-
der,
➮
press and hold down the MENU
button
7 for longer than two sec-
onds.
“TRK SCAN” appears in the display
and the number of the current track
flashes.
Cancelling SCAN
To stop scanning,
➮
briefly press the MENU button
7.
The currently scanned track will then
continue to be played normally.
Note:
● You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Pausing playback (PAUSE)
➮
Press button 3 ;.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3 ; whilst pause
is activated.
Playback is resumed.
CD-CHANGER MODE
02CalgMP36_gb 08.02.2006, 9:38 Uhr 51