Blaupunkt CALGARY MP36 - Manual (Page 17)

44
Repeating tracks (REPEAT)
If you want to repeat a track,
➮
press the 4 RPT button
;.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol lights up. The
track is repeated continuously until you
deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮
press the 4 RPT button ; again.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol is displayed.
Pausing playback (PAUSE)
➮
Press button 3 ;.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3 ; whilst pause
is activated.
Playback is resumed.
Configuring the display
You can choose between two display
types for CD mode:
● Track number and clock time
● Track number and playing time
➮
Press the MENU button 7.
➮
Press the or button
8 re-
peatedly until “CD DISP” appears
in the display.
➮
Press the or button
8 to
switch between “PLAY TIME” and
“CLOCK”.
➮
Press the MENU button
7 twice.
Random track play (MIX)
➮
Press the 5 MIX button ;.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Cancelling MIX
➮
Press the 5 MIX button
; again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
➮
Press and hold down the MENU
button
7 for longer than two sec-
onds.
The next track will then be scanned.
Note:
● You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Cancelling SCAN and continuing
listening to a track
➮
To cancel scanning, press the
MENU button
7.
The currently scanned track will then
continue to be played normally.
CD MODE
02CalgMP36_gb 08.02.2006, 9:38 Uhr 44