Radio mode – Blaupunkt CALGARY MP36 User Manual

Page 12

DANSK

ENGLISH

DEUTSCH

FRANÇAIS

ALIANO

NEDERLANDS

SVENSKA

ESP

AÑOL

PORTUGUÊS

Setting the sensitivity of station
seek tuning

You can choose whether the radio
should only tune into stations provid-
ing good reception or whether it can
also tune into those with a weak re-
ception.

➮

Press the MENU button

➮

Press the or button

8 re-

peatedly until “SENS” and the cur-
rently set value appear in the dis-
play.

“SENS HI6” means that the tuner is set
to the highest sensitivity setting. “SENS
LO1” means it is set to the lowest sen-
sitivity setting.

➮

Set the desired sensitivity using
the

buttons

When you have finished adjusting the
setting,

➮

press the MENU button

Note:

●

You can set different sensitivity
levels for FM and MW or LW
(AM).

Storing stations

Storing stations manually

➮

Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW).

➮

Tune into the station that you
want.

➮

Press and hold down one of the
station buttons 1 - 6

; for longer

than two seconds to assign the
station to that button.

Storing stations automatically
(Travelstore)

You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are
stored in the FMT memory bank.

Note:

●

Any stations previously stored in
this memory bank are deleted in
the process.

➮

Press and hold down the BND•TS
button

< for longer than two sec-

onds.

The storing procedure begins. “FM
TSTORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memo-
ry bank.

Listening to stored stations
➮

Select the memory bank or wave-
band.

➮

Press the station button 1 - 6

;

that corresponds to the station
that you want to listen to.

Scanning receivable stations
(SCAN)

You can use the scan function to listen
to all the receivable stations briefly. You
can set the scanning time in the menu
to between 5 and 30 seconds (in steps
of 5 seconds).

Starting SCAN

➮

Press and hold down the MENU
button

7 for longer than two sec-

onds.

RADIO MODE

02CalgMP36_gb

08.02.2006, 9:38 Uhr