MTS Acumen Electrodynamic Lift and Move Guide - Manual (Page 19)

Load Frame Specifications
MTS Acumen 3 MTS Acumen 1 Description Dimension
26 mm (1.02 in) 26 mm (1.02 in) Minimum test space height
1
A
819 mm (32.24 in) 603 mm (23.74 in) Maximum test space height
2
A
133 mm (5.24 in) 133 mm (5.24 in) Working height
3
B
460 mm (18.11 in) 375 mm (14.75 in) Test space width C
63.5 mm (2.5 in) 63.5 mm (2.5 in) Column diameter D
634 mm (24.96 in) 550 mm (21.65 in) Footprint width E
501 mm (19.82 in) 485 mm (19.09 in) Footprint depth
4
F
764 mm (30.08 in) 679 mm (26.73 in) Overall width
5
G
1726 mm (67.95 in) 1511 mm (59.49 in) Overall height
6
H
MTS Acumen Load Frame Weight
Note:
Specifications subject to change without notice.
Load Frame Weight
Weight
159 kg (350 lb) MTS Acumen 1
188 kg (415 lb) MTS Acumen 3
1
Assumes standard system load cell installed, crosshead fully lowered, and actuator fully extended to end of
the dynamic stroke.
2
Assumes standard system load cell installed, crosshead fully raised, and actuator fully retracted to end of the
dynamic stroke.
3
From table to top of work surface, without optional isolation pads.
4
For systems with optional test area enclosure, add 98 mm (3.8 in) for overall system dimensions.
5
For systems with optional test area enclosure, add 45 mm (1.8 in) for overall system dimensions.
6
Measured with crosshead fully raised, without optional isolation pads.
MTS Acumen™ Electrodynamic Test System 19
Load Frame Dimensions