MTS Tensile Grip Face-1000 kN - Manual

Copyright information © 2010 MTS Systems Corporation. All rights reserved.
Trademark information
MTS is a registered trademark and MTS Fundamental is a
trademark of MTS Systems Corporation within the United
States. These trademarks may be protected in other countries.
Contact information MTS Systems Corporation
http://www.mts.com/en/Global/index.asp
ISO 9001 Certified QMS
Specifications
Model F-JL106A1 .01-01 ..01-02 .02-01 .02-02 .02-03 .02-04
Specimen (mm) 2-20 20-40
Φ15- Φ25 Φ25- Φ36 Φ36- Φ40 Φ40- Φ55
Maximum Load (kN) 1000
Specimen Hardness (HRC)
≤40
Height (mm) 128
Width (mm) 125
Wedge Face Flat Flat Vee Vee Vee Vee
Wedge Face Thickness (mm) 56 46.5 53 47.5 45 42.5
Wedge Face Weight
(single) (kg)
3.86 3.06 3.55 3.05 2.78 2.52
Temperature Range (°C) 0 to +50
Saline Tolerant No
Immersion Proof No
Tensile Grip Face, 1000 kN
http://support.mts.com
MTS Fundamental
™
Accessories
100-231-439