MK Diamond MK-VTS-50 - Manual (Page 19)

19
MK-VTS/50 FLOOR SCRAPER MAINTENTANCE
REPAIRS
If your tool is damaged, contact MK Diamond for a return authorization number and return the entire tool.
• Shipments are not accepted without a return authorization number.
• COD or freight collect shipments will not be accepted.
TROUBLESHOOTING
THERE IS NO POWER
1. Inspect electrical cord.
MOTOR NOISE
1. Make sure fan guard is not bent.
RATTLING
1. Tighten loose nuts and bolts.
MACHINE IS HARD TO HANDLE
1. Remove the counterweight.
2. Change to a smaller blade.
3. Sharpen blade.
BLOWS FUSES OR CIRCUIT BREAKERS
1. Check and/or change attached power cord. Use a 12 gauge cord, 50' or less.
2. Move to a different outlet or a better circuit.
WHEEL ADJUSTMENT WON'T WORK
1. Grease threaded shaft.