MK Diamond IXL 5" Dust Shroud - Manual

5" Dust Shroud
INSTRUCTION SHEET
1. If grinder has a small throat,
use collar so shroud fits tightly.
5. If necessary place large washer(s)
on cup adapter nut, so cup wheel
extends 1/16" to 1/8" beyond shroud.
6. Place cup wheel on cup
adapter nut.
7. Screw hex nut onto cup
nut assembly.
8. Tighten hose clamp so shroud
is firmly attached to grinder.
Ensure cup wheel does not
contact shroud.
9. Shroud is now ready to be
attached to vacuum.
2. Press shroud on grinder. 3. Small shim is for use with
grinders that have a small
shoulder.
4. Screw cup adapter nut on
grinder arbor shaft.
NOTE:
If using a cup wheel with a
5/8” - 11 nut skip to Step #8.