MK Diamond MK-20 Series - Manual (Page 25)

25
• Always turn the master engine switch to the off position.
• NEVER lubricate components or attempt service on a running machine.
• Keep the machinery in proper running condition.
• Fix damage to the machine immediately and always replace broken parts, or missing decals.
MK-20 SERIES MAINTENANCE
NEW MAINTENANCE
Perform the following after initial purchase and operation of the saw.
(A)
Change engine oil after
first month or first 20 operating
hours (See Engine Manual).
(B)
Check and adjust tension on
all belts following first
48 hours of operation.
MAINTENANCE SAFETY
Maintenance Following Use
The following maintenance should be performed following each use.
(A)
Shut down the Engine. Let saw cool
before proceeding.
(B)
Check Air Filter
(See Engine Manual).
(C)
Lubricate the Grease Fitting on the
Blade Shaft.