MK Diamond MK-101-24 - Manual (Page 17)

17
1. The MK-101-24 weighs approximately ninety-eight (98) pounds.
2. Never transport the MK-101-24 with water in the Water Basin.
CAUTION
The MK-101-24 is designed with a rigid frame and removable Cutting Head. Two people are required
to transport the MK-101-24 with the Cutting Head installed. Remove the Cutting Head if one person is
transporting the saw (see Cutting Head Installation and Removal in the following section).
TRANSPORT
Lift Point Lift Point
Cutting Head
The MK-101-24 weighs approximately ninety-eight (98) pounds; follow the
guidelines for transport in the TRANSPORT section, when placing it on the
stand.
CAUTION
StanD (Optional)
MK-101-24 PRODUCT SPECIFICATION
(A)
Open the stand and place on
flat surface
(B)
Remove Water Basin,
place saw on stand
(C)
Ensure the back of the
saw frame is positioned
properly
(E)
Reinstall the Water Basin
(D)
The front of the saw
frame will extend 7” in
front of the stand
If using the MK Diamond Stand, Part # 168244, follow these steps.