Metal Sales Pro-Panel II Manual - Manual (Page 2)

PPP-2 © Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
PRO-PANEL II ® P
anel
o
verview
PANEL PROFILE
SLOPE
SUBSTRATE
COVERAGE
LENGTH
AVAILABILITY
APPLICATION
FASTENING SYSTEM
FASTENERS
MATERIALS
FINISH
The minimum recommended slope for any Pro-Panel II roofing panel is 3:12.
Pro-Panel II is designed to be utilized over open structural framing, but can easily be used with a solid substrate.
The recommended substrate is 5 /
8
" plywood with a 30 pound felt moisture barrier. To avoid panel distortion, use
a properly aligned and uniform substructure.
Pro-Panel II panels are available in a 36" width with a 5 /
8
" rib height.
Lengths under 5'-0" are available with some cutting restrictions. Maximum recommended panel length is 45'-0".
Longer panels require additional consideration in packaging, shipping, and erection. Please consult your Metal
Sales branch for recommendations (see PGI-2 and PGI-3 for locations).
Pro-Panel II panels are available in 26 gauge.
Commercial and Industrial panel.
Direct Fasten (Exposed)
The fastener selection guide should be consulted for choosing proper fasteners for specific applications.
Quantity and type of fastener must meet necessary loading and code requirements (see PGI-12-14).
Steel grade 50 per ASTM A-792
Steel grade 80 per ASTM A-792 or ASTM A-653
 * Acrylic Coated Galvalume ® (ACG) / ASTM A-792 - AZ55
 Prepainted Galvalume / ASTM A-792 - AZ50
 MS Colorfast45 ®
 ** Fluorocarbon (PVDF)
* Differential appearance of Acrylic Coated Galvalume roofing materials is not a cause for rejection.
** Meets both Kynar 500 and Hylar 5000 specifications.
Anti-Siphon Groove
C
36" Coverage
3 1 /
8
" 2 3 /
4
"
9"
5 /
8
"
2"
11 /
16
"
PERFORMANCE TEST
UL 2218, UL 790, Miami-Dade County Approved, Texas Department of Insurance