Memmert ONE 7 - 45 Oilbath (Generation 2003) - Manual (Page 18)

EXCELLENT page 18
6 Monitoring the programme sequence
Bath does not heat up
During the delayed switch-on the symbol
flashes and the display alternates between
residual time and actual temperature
°C
°C
Bath heats up to setpoint
temperature
SP activated:
After the end of the delayed switch-on the
symbol goes dark and the bath heats up to
the selected setpoint temperature. The display
alternates between actual temperature and
SP until the setpoint temperature is reached.
Heating is indicated by the symbol.
°C
°C
Bath holds setpoint
temperature
SP is de-activated or after the setpoint
temperature has been reached:
During the hold time the symbol flashes
and the display alternates between the residual
time and the actual temperature.
°C
°C
Heating is switched off
After the hold time has elapsed the symbol
goes dark, the heating is switched off, and
the display alternates between the actual
temperature and END.
°C
°C
*
t
90°C
hold 4h
delay 6h
*
t
90°C
delay 6h
hold 4h
*
t
90°C
hold 4h
delay 6h
*
t
90°C
delay 6h
hold 4h