Memmert Central water supply - Manual (Page 13)

13
Replacing fi lter cartridges
1
2
3
4
Fig. 9 Dismantle the water supply tank
1 Connection lines of the floating switch
2 Feed pipes to the appliance connections
3 Water supply tube
4 Attachment (rubber band)
7. Put the cover of the water supply tank back on. Place the tank back in its holder and
fasten it with the rubber band.
8. Push the three feed pipes to the appliance connections (2) and the water supply tube
(3) from the back through the cover into the water supply tank.
9. Plug the connection lines of the floating switch (1) back onto the terminal strip.
Check that the floating switch moves freely in the water supply tank.