Memmert Central water supply - Manual (Page 11)

11
Replacing fi lter cartridges
3.2 Removing covers
In order to replace the filter cartridges, the covers of the central water supply must first
be removed.
1. Switch off any appliances connected.
2. Unplug the power supply unit from the socket and remove the 12-V connection plug
from the central water supply.
3. Turn off the water tap.
4. Dismantle the cover of the central water supply. To do so, remove the four screws at
the front and back and lift off the cover (Fig. 5).
5. Undo the fastening screws of the side and rear cover (U-shaped profile) and remove
the profile (Fig. 6). The filter cartridges can now be accessed at the rear.
Fig. 5
Remove fastening screws of the cover
and take off cover
Fig. 6
Undo the fastening screws of the side
and rear cover (U-shaped profile)
and remove the profile