Pairing (continued) – MEElectronics Air-Fi Venture AF52 User Manual
Page 15

12
Pairing (Continued)
Other Phones, Tablets, and Devices
Please refer to your device manual for instructions on how
to pair Bluetooth devices
On your device, turn Bluetooth on and go to the appropriate
pairing window
Make sure the Venture is off and within 1 meter of your device
Make sure Bluetooth is enabled on your device and you are in
the Bluetooth screen
Initiate pairing mode by holding the power button
for 7 seconds, until you hear “pairing.”
(Note: Pairing mode will be active for 2 minutes 30 seconds.
If no devices are paired within that time, the Venture
will return to standby mode.)
Wait until you see “AF52” in the list of Bluetooth devices
Tap or press on “AF52” to pair and connect your device to the
Venture; if your device asks for a pin, enter “0000”
The Venture will say “pairing completed” once pairing is
complete. “AF52” may show “connected” on your device;
the blue LED on the Metro will flash twice every 5 seconds to
indicate it is connected in standby mode
If pairing fails after several tries, please refer to the Bluetooth
device’s user manual for further information.
a)
b)
c)
d)
e)
f)
g)
h)
For additional information on Bluetooth and pairing videos,
please visit
meelec.com/bluetooth
.