Belkin F5U237EA - Manual (Page 10)

6
INSTALLATION
Important Note: Hi-Speed hub drivers are included with most USB 2.0 PCI
upgrade cards, and are pre-installed along with the PCI
card drivers. If you purchased an upgrade card prior to
the release of Hi-Speed hub support, please check with
your PCI card vendor for an updated USB 2.0 driver. The
Belkin USB 2.0 driver supports all competitive cards
based on the NEC host controller with the exception of
Adaptec. The most recent Belkin driver is available at
www.belkin.com.
4. Plug the USB-A connector of the USB device, or an additional hub,
into any of the downstream ports of the F5U237.
Important Note: When moving a device from one port on the hub to
another, it may be necessary to re-install the USB drivers
for that device.
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 6