beautypg.com

Mayline Light Box User Manual

Page 2

background image

3. Mount self-adhesive rubber bumpers* in locations shown
at both rear corners of pan.

4. Mount Light Top to table base by inserting upper hinge

members into mating hinge members on table rail with the
Light Top in a near vertical position.

* TILT ROD w/Cushion Spring

* Tilt Rod Guide

5. Slide a cushion spring on each tilt rod and insert the rods into
the tilt rod guides on the side rails of the table.

6. Raise and lower the Light Top through its range of travel so
that the tilt rods brackets locate themselves. Then tighten the tilt

rod bracket screws. Do not over tighten.