Mayline Light Box - Manual

INSTALLATION INSTRUCTIONS
for LIGHT BOX
1. With Light Box face down (still in carton or placed on clean, smooth surface) insert Plastic
Expansion Nuts (E1) in holes "B" and "C". Nuts may be tapped lightly with a hammer to seat them.
2. Attach Upper Hinge members (hole "B") and Tilt Rod Assemblies (holes "C") with #10 x 3/4
Screws (E2). Upper Hinge Members should be tightened snugly, but those in the Tilt Rod Brackets
should be loose enough to allow adjustment in the slots.
INSTRUCTIONS FOR MOUNTING LIGHT BOX
ON FOUR-POST TABLE BASE
~~Denotes Size
When ordering components, specific size information may be
required. Contact a Mayline Customer Service Representative.
1-800-822-8037
COMPONENTS:
REF. # QTY. DESCRIPTION PART No.
1 1 LIGHT ASSEMBLY CALL~~
HARDWARE BAG (PART No. A7695)
*for individual item, order that part number
REF. # QTY DESCRIPTION PART No.
E1 8 EXPANSION NUT T60*
E2 8 #10 X 3/4 SCREW X11*
NOTE: Please count and inspect all pieces before
disposing of any carton or packing materials.
20627R3
20628R3
* RUBBER BUMPER
BUMPER LOCATION
ONE EACH SIDE
* TILT ROD ASSEMBLY
AND CUSHION SPRING
#10 X 3/4 SCREW (E2)
* UPPER HINGE
EXPANSION NUT (E1)
4 HOLES "B" ARE FOR
UPPER HINGE MOUNTING
4 HOLES "C" ARE FOR TILT
ROD BRACKET MOUNTING
* ITEMS INCLUDED WITH THE BASE ASSEMBLY
"C"
"C"
"B"
"B"
"C"
"C"
"B"
"B"