Longevity SpoolGun 140 - Manual (Page 8)

SpoolGun 140 compatible with the MigWeld 140
8 | P a g e
WARNING
ARC WELDING can be hazardous
When using tool, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment Read all instructions before using this tool!
ELECTRIC SHOCK can KILL
Improper use of electric arc welders can cause electric
shock ,injury,and death! Take all precautions described in
this manual to reduce the possibility of electric shock.
FUMES AND GASES
Fumes and gases can be dangerous do net breathe fumes
that are produced by the arc welding operation .These fumes
are dangerous. Keep the head and face out of the welding fumes
Shielding gases used for arc welding can displace air and cause
injury or death. Always use enough ventilation, especially in
confined areas, to insure breathing air is safe.
WELDING SPARKS
Welding sparks can cause fire or explosion. DO not operate
any electric arc welder in areas where flammable or explosive
vapors may be present. Take precautions to be sure that flying
sparks and heat do not cause flames in hidden areas, cracks, etc.
Always keep a fire extinguisher accessible while performing arc
welding operations. Before starting or servicing any electric arc
welder, read and understand all instructions. Failure to follow safety
precautions or instructions can cause equipment damage and/or serious personal injury
or death. All installation, maintenance, repair and operation of this equipment
should be performed by qualified persons only in accordance with
national, state, and local codes