Let's Go Aero V2 Two-Bike Carrier VME-V2 - Manual

V 2™ Two-Bike Carrier
User Manual
Part No. VME-V2
Description Qty
V2 Base 1
NoMotion™ Pin w/ clip
SilentACT™ Locking Pin
1
1
2” Nylon Adapter 1
Wing with Pads 2
Wire Lock Pin 2
Double Toggles 4
Wheel Cradle Assembly
Wheel Cradle
4
Toggle Balls 4
Hair Pin Clip 4
U-Clip 4
Parts List
Tool required to tighten
NoMotion™ Hitch Pin: 3/4”
Copyright © 2013 Let’s Go Aero, Inc.
Assembly
Insert V2 Base Shank into receiver hitch. Align the pin hole of the
shank with that of the vehicle hitch pin hole. Thread in the NoMotion
Pin, apply clip and tighten with a ¾” suitable tool.
NEW! VALUE-ADDED FEATURE
SilentACT™ Accessory Control Technology - No Motion, No Tool
required device locks rack to hitch. For security and convenience,
apply SilentACT™ locking hitch pin.
On vehicles with a 2” hitch receiver, use the 2” nylon adapter as
shown in the assembly view.
Step 1: Insert V2 Base Shank into receiver hitch
Bike Carrier Shank
Wing with
Pads
Wire Lock Pins
NoMotion Pin
2” Nylon
Adapter
Wheel Cradle
Assembly
Double
Toggles
U.S. Patent No: D684917; patents pending
VME-V2rev0614
No Tool Required for
SilentACT™ Locking Hitch Pin