Lenze ASY Starter Lenze OPC UA-Server - Manual (Page 6)

Access to Lenze devices with OPC UA
Starting the Lenze OPC UA server
6
Lenze · EASY Starter | OPC UA-Server · 1.0 EN - 04/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.2 Starting the Lenze OPC UA server
After configuration the Lenze OPC UA server must be started: a link can be found in the Start Menu
of Windows: All programsLenzeOPC

Tip!
When the Lenze OPC UA server has been started, the following symbol is visible in the
Microsoft Windows system tray:
When starting, the Lenze OPC UA server reads the file which was previously created in the »EASY
Starter«.  »EASY Starter«: Using OPC UA ( 5)
3.3 Lenze OPC UA server: options
Normally no further settings are required. A context menu with additional options is available in the
system tray (tray icon):
Right-click on the symbol
Options:
• Close the Lenze OPC UA server.
• Have a logging file with error information output.
• Display information on the server (endpoint URL), administer certificates.