Lenze ECSDExxx - Manual (Page 62)

Safety instructions
General safety and application notes for Lenze power supply modules
1
l
62 EDKCSDE040 DE/EN/FR 4.0
1 Safety instructions
1.1 General safety and application notes for Lenze power supply modules
(acc. to Low−Voltage Directive 2006/95/EC)
For your personal safety
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material assets!
ƒ Only use the product as directed.
ƒ Never commission the product in the event of visible damage.
ƒ Never commission the product before assembly has been completed.
ƒ Do not carry out any technical changes on the product.
ƒ Only use the accessories approved for the product.
ƒ Only use original spare parts from Lenze.
ƒ Observe all regulations for the prevention of accidents, directives and
laws applicable on site.
ƒ Transport, installation, commissioning and maintenance work must only
be carried out by qualified personnel.
– IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC−Report 664 or
DIN VDE 0110 and national regulations for the prevention of accidents
must be observed.
– According to the basic safety information, qualified, skilled personnel
are persons who are familiar with the assembly, installation,
commissioning, and operation of the product and who have the
qualifications necessary for their occupation.
ƒ Observe all specifications in this documentation.
– This is the condition for safe and troublefree operation and the
achievement of the specified product features.
– The procedural notes and circuit details described in this
documentation are only proposals. It is up to the user to check whether
they can be transferred to the particular applications. Lenze
Automation GmbH does not accept any liability for the suitability of the
procedures and circuit proposals described.
ƒ Depending on their degree of protection, Lenze power supply modules
and their accessory components can be live during operation. Surfaces
can be hot.
– Non−authorised removal of the required cover, inappropriate use,
incorrect installation or operation, creates the risk of severe injury to
persons or damage to material assets.
– For more information please see the documentation.