Lenze SDSGA Mounting Instructions - Manual (Page 10)

3 Mechanical installation
Installation information
MA 33.0003 DE/EN/FR/IT/ES 3.0
10

H1_MechINS-verbindung-buchse-motorstecker
3 Mechanical installation Installation information
ƒ Use an appropriate means of transport and lifting equipment!
ƒ Before transport
– check that all component parts are safely mounted,
– check that all component parts with a loose fastening are secured or removed,
– tighten all transport aids (eye bolts or support plates).

Danger!
Danger by toppling or falling loads!
ƒ The payload of the hoists and load handling devices must at least
correspond to the weight of the load. For weights see the  catalogue.
ƒ Secure the load so that it will not topple or fall down.
ƒ Do not stand underneath suspended loads!

Stop!
The shaft must not be exposed to knocks or bumps! Motor can be destroyed!
Drive elements must be mounted on the motor shaft via the threading. An
extracting device must be used when dismounting. Fasten coupling securely.
Securely fasten motor and ensure unimpeded ventilation.
Plug connection
When connecting the cable socket to the motor connector, make sure that the aids to
orientation (pos. 1) are facing each other. Only then, trouble-free operation is ensured.