Lenze EMF2180IB EthernetCAN - Manual (Page 55)

Diagnostics
LED status displays
EDKMF2180 DE/EN/FR/ES/IT 3.0
55

H1_Diagnose-st_00tu0
LED
Description Pos. Colour / status
 +  off Connection to master not established.
green CANopen status (” Z ”)
red CANopen error (” F ”)
red Z : Bus off
blinking fast (jittering) Automatic baud rate recognition is active.
blinking (green) every 0.2 s Z : Pre-Operational, F : None
blinking (green) every 0.2 s
blinking (red) 1 x, 1 s off Z : Pre-Operational, F : Warning limit reached
blinking (green) every 0.2 s
blinking (red) 2 x, 1 s off Z : Pre-Operational, F : Node guard event
on (green) Z : Operational, F : None
on (green)
blinking (red) 1 x, 1 s off Z : Operational, F : Warning limit reached
on (green)
blinking red 2 x, 1 s off Z : Operational, F : Node guard event
on (green)
3 x blinking red, 1 s off Z : Operational, F : Sync message error
blinking (green) once per
second Z : Stopped, F : None
blinking (green) once per
second
blinking (red) 1 x, 1 s off Z : Stopped, F : Warning limit reached
blinking (green) once per
second
blinking red 2 x, 1 s off Z : Stopped, F : Node guard event