Lenze CPC 2800 Mounting Instructions - Manual (Page 22)

Installation
Important notes
4
l
22 MA_CPCx8xx DE/EN/FR/ES/IT 2.0
4 Installation
4.1 Important notes
ƒ To ensure sufficient dissipation of heat, the device may only be attached
to the control cabinet wall in a vertical position with the ventilation slots
at the top and bottom.
ƒ If a fanless variant is used, the rear housing plate must lie flat against the
control cabinet wall to dissipate additional heat. The rear housing plate
can have a surface temperature of up to 65 °C.
(
Stop!
Short circuit and static discharge
The device contains components which are endangered in the case
of short circuit or static discharge.
Possible consequences:
ƒ The device or parts of it will be destroyed.
Protective measures:
ƒ Always switch off the voltage supply when working on the
device. This particularly applies:
– Before connecting / disconnecting connectors.
– Before plugging in / plugging out modules.
ƒ All persons handling printed circuit boards have to take account
of ESD measures.
ƒ Contacts of plug connectors must not be touched.
ƒ Printed circuit boards may be touched only at places free from
electrical contacts and may be placed only on appropriate
materials (e.g. on ESD packaging or conductive foam material).
ƒ Printed circuit boards may only be transported and stored in ESD
packaging.