Labnet Spectrafuge 16M Microcentrifuge User Manual - Manual (Page 2)

Copyright January 2002, Labnet International.
All rights reserved.
Reproduction without prior written permission is prohibited.
Information contained herein is subject to change without notice.
Safety Precautions
NEVER use the centrifuge in any manner not specified in these instruc-
tions.
NEVER operate the centrifuge without a rotor properly attached to the
shaft.
NEVER fill tubes while they are in the rotor. Liquid spillage may harm
unit.
NEVER put hands in the rotor area unless the rotor is completely stopped.
NEVER move the centrifuge while the rotor is spinning.
NEVER use solvents or flammables near this or other electrical equipment.
NEVER centrifuge flammable, explosive or corrosive materials
NEVER centrifuge hazardous materials outside of a hood or proper
containment facility
ALWAYS load the rotor symmetrically. Each tube should be counterbal-
anced by another tube of the same type and weight
ALWAYS locate the centrifuge within easy access to an electrical outlet.
ALWAYS use only microcentrifuge tubes made from plastic and designed to
withstand centrifugal forces of at least 16,000 xg.