beautypg.com

Kuryakyn 1460 SNAP-N-GO DRINK HOLDER User Manual

Installation, Snap-n-go drink holder 1460

background image

PARTS INCLUDED

1

Snap-N-Go Drink Holder Ring

1

Beverage Carrier

1

1" Clamp Assembly

1

Hardware Kit

1

1/4”-20 x 2-1/4" Hex Head Cap Screw

1

M6 x 1 x 60MM Hex Head Cap Screw

1

1/4”-20 x 2-1/2" Hex Head Cap Screw

1

Spacer

1

Clamp Accessory Mount Spacer

1

1"

Sleeve

2

1/4" Wave Washers

1

Aluminum

Washer

1

1/4”-20

Acorn

Nut

1

Installation

Instructions

Please read and understand entire instructions before starting installation.

THANK YOU FOR CHOOSING K

ϋ

RYAKYN!

IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR

PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL

INSTRUCTIONS, WARNINGS, CAUTIONS AND NOTICES REGARDING THE USE
AND CARE OF THIS PRODUCT.

TOOLS SUGGESTED

Set of Combination Wrenches, Set of Hex Wrenches, Set of Torx Wrenches

STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.

STEP 1

Read and understand all steps in the instructions before starting the

installation. Park the motorcycle on a hard, level surface and turn off the

ignition.

NOTE:

Universal for 1” bar application, for clutch and brake perch

applications.

Universal Beverage Carrier will accept most average sized

cups, cans, bottles, and mugs with a 2-3/8” to 3-1/2” diameter.


INSTALLATION

CUSTOMER SERVICE

877.370.3604 (toll free)

INSTALLATION QUESTIONS

[email protected]

or call 715.247.2983

LIMITED WARRANTY

Küryakyn warrants that any Küryakyn products

sold hereunder, shall be free of defects in

materials and workmanship for a period of one

(1) year from the date of purchase by the

consumer excepting the following provisions:

Küryakyn shall have no obligation in the event

the customer is unable to provide a receipt

showing the date the customer purchased the

product(s).

The product must be properly installed,

maintained and operated under

normal conditions.

Küryakyn makes no warranty, expressed or

implied, with respect to any gold plated

products.

Küryakyn shall not be liable for any

consequential and incidental damages, including

labor and paint, resulting from failure of a

Küryakyn product, failure to deliver, delay in

delivery, delivery in nonconforming condition, or

for any breech of contract or duty between

Küryakyn and a customer.

Küryakyn products are often intended for use in

specific applications. Küryakyn makes no

warranty if a Küryakyn product is used in

applications other than intended.

Küryakyn electrical products are warranted for

one (1) year from the date of purchase by the

consumer. L.E.D.’S contained in components of

Küryakyn products will be warranted for defects

in materials and workmanship for 3 years from

the date of purchase where as all other

components shall be warranted for one(1) year.

This includes, but is not limited to; control

modules, wiring, chrome & other components.

Küryakyn makes no warranty of any kind in

regard to other manufacturer¹s products

distributed by Küryakyn. Küryakyn will pass on

all warranties made by the manufacturer and

where possible, will expedite the claim on behalf

of the customer, but ultimately, responsibility for

disposition of the warranty claim lies

with the manufacturer.

ABOUT OUR CATALOG

For purchasing Küryakyn® products, you

can receive a complete catalog free of charge.

Send the Proof-of-Purchase below with

your address to: Küryakyn, P.O. Box 339,

Somerset, WI 54025.

Please indicate either Accessories Catalog for

Harley-Davidson® or GL & Metric Cruisers.

Be sure to ask your local dealer about other

Küryakyn® products, the motorcycle parts and

accessories designed for riders by riders.

©2005 Küryakyn USA® All Rights reserved.

SNAP-N-GO

DRINK

HOLDER

1460

1460-22MC-0713

-cont.-

THIS INDICATION ALERTS YOU TO THE FACT THAT

IGNORING THE CONTENTS DESCRIBED HEREIN CAN

RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.

This indication alerts you to the fact that ignoring the

contents described herein may negatively affect product

performance and functionality or damage the product itself

or the product it is being attached to.

This indication alerts you to the fact that ignoring

the contents described herein can result in minor or

moderate potential injury.

IF INSTALLING THIS PRODUCT FOR ANOTHER PARTY,

PLEASE MAKE SURE THEY RECEIVE THIS COPY OF THE
INSTALLATION INSTRUCTIONS SO THEY ARE AWARE OF

THE IMPORTANT INFORMATION CONTAINED IN THEM.