Brother HL-2700CN Series - Manual (Page 10)

8
Setting Up Your Printer
7
Pull off the tape labeled REMOVE, and then
remove the orange protective cover.
8
Put the toner cartridge by sliding it into the
correct guide. Match the cartridge color
label to the corresponding label on the
printer.
9
Repeat steps 5 through 7 for the remaining
toner cartridges.
0
Close the front cover.
1
Open the back cover.
2
Pull out the tension release pins from both
sides of the fusing unit.
3
Close the back cover.
REMOVE tape Protective cover
K
Y
M
C
K
Y
M
C
2
Remove the tension
release pins of the
Fusing Unit
Step 1